415.0.250. Variable displacement swashplate pump, open circuit design
Purpose: rolling mills, hydraulic presses, press shears Pumps are intended for operation in open circuits.
The pump feed is proportional to shaft rotation speed and working displacement. The working displacement value is steplessly regulated from zero to max. value by means of changing the swashplate inclination angle.
Working displacement: 250 cc/rev.
The pump feed is proportional to shaft rotation speed and working displacement. The working displacement value is steplessly regulated from zero to max. value by means of changing the swashplate inclination angle.
Working displacement: 250 cc/rev.
- axial piston variable displacement pump, swashplate design;
- mounting flange: Ø224 mm, 4 holes as per ISO 3019-2 (metric);
- rotation direction: clockwise, counterclockwise.
- mounting flange: Ø224 mm, 4 holes as per ISO 3019-2 (metric);
- rotation direction: clockwise, counterclockwise.
- keyed – AS18x11x100 as per DIN 6885
- splined – W60x2x28x9g as per DIN 5480
- splined – W60x2x28x9g as per DIN 5480
- tandem installation of auxiliary axial piston, gear or radial piston pump.
- DR
- DRG
- LR2S
- DRG
- LR2S
- A4VSO (Bosch Rexroth)
- 42R(L) (Sauer Danfoss)