313 SERIES. Variable displacement bent-axis pumps
Purpose: excavators, hydraulic presses
Pumps are intended for operation in open circuits of stationary units and mobile machines.
Working displacement: 12, 28, 55, 56, 80, 107, 112, 160, 250 cc/rev.
Mounting dimensions: as per DIN / ISO.
Max. operating pressure:
continuous – 350 bar
peak – 400 bar
Pumps are intended for operation in open circuits of stationary units and mobile machines.
Working displacement: 12, 28, 55, 56, 80, 107, 112, 160, 250 cc/rev.
Mounting dimensions: as per DIN / ISO.
Max. operating pressure:
continuous – 350 bar
peak – 400 bar
- axial piston variable displacement pump, bent-axis design;
- cylinder block bent-axis angle 25°-28°;
- bimetal steel cylinder block.
- cylinder block bent-axis angle 25°-28°;
- bimetal steel cylinder block.
- shaft rotation speed sensor.
- hydraulic proportional;
- hydraulic direct;
- mechanical;
- electric proportional (12, 24 V); - electric discrete (12, 24 V).
- hydraulic direct;
- mechanical;
- electric proportional (12, 24 V); - electric discrete (12, 24 V).
- proportional;
- Load sensing (LS);
- constant pressure;
- constant power;
- operating from external action.
- Load sensing (LS);
- constant pressure;
- constant power;
- operating from external action.
** at max. rotation speed
- A7V, A7VO, A10VO, A11VO (Bosch Rexroth)
- H1V (Sam Hydraulik)