415.0.260. Variable displacement swashplate pump, open circuit design
Purpose: dump trucks, drilling rigs
The pump feed is proportional to shaft rotation speed and working displacement. The working displacement value is steplessly regulated from zero to max. value by means of changing the swashplate inclination angle.
Working displacement: 260 cc/rev.
The pump feed is proportional to shaft rotation speed and working displacement. The working displacement value is steplessly regulated from zero to max. value by means of changing the swashplate inclination angle.
Working displacement: 260 cc/rev.
- mounting flange: ∅165.1 mm;
- 4 holes according to ISO 3019-2 (metric);
- shaft design: slotted W60x2x30x28x9g DIN 5480;
- pumps are performed with left and right rotation;
- ability to limit the minimum and maximum working volumes;
- built-in booster pump, allows the pump to operate at a shaft speed of up to 2300 rpm.
- 4 holes according to ISO 3019-2 (metric);
- shaft design: slotted W60x2x30x28x9g DIN 5480;
- pumps are performed with left and right rotation;
- ability to limit the minimum and maximum working volumes;
- built-in booster pump, allows the pump to operate at a shaft speed of up to 2300 rpm.
- splined – 1 1/4’’ 14T 12/24 ANSI B92.1a
- pressure gauge
- A11VLO 260 (Bosch Rexroth)